743 lines
27 KiB
C
743 lines
27 KiB
C
/* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <inttypes.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/queue.h"
|
|
#include "freertos/timers.h"
|
|
#include "freertos/semphr.h"
|
|
#include "freertos/event_groups.h"
|
|
#include "esp_idf_version.h"
|
|
#include "esp_log.h"
|
|
#include "unity.h"
|
|
#include "iot_button.h"
|
|
#include "sdkconfig.h"
|
|
|
|
static const char *TAG = "BUTTON TEST";
|
|
|
|
#define TEST_MEMORY_LEAK_THRESHOLD (-400)
|
|
#define BUTTON_IO_NUM 0
|
|
#define BUTTON_ACTIVE_LEVEL 0
|
|
#define BUTTON_NUM 16
|
|
|
|
static size_t before_free_8bit;
|
|
static size_t before_free_32bit;
|
|
static button_handle_t g_btns[BUTTON_NUM] = {0};
|
|
|
|
static int get_btn_index(button_handle_t btn)
|
|
{
|
|
for (size_t i = 0; i < BUTTON_NUM; i++) {
|
|
if (btn == g_btns[i]) {
|
|
return i;
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void button_press_down_cb(void *arg, void *data)
|
|
{
|
|
TEST_ASSERT_EQUAL_HEX(BUTTON_PRESS_DOWN, iot_button_get_event(arg));
|
|
ESP_LOGI(TAG, "BTN%d: BUTTON_PRESS_DOWN", get_btn_index((button_handle_t)arg));
|
|
}
|
|
|
|
static void button_press_up_cb(void *arg, void *data)
|
|
{
|
|
TEST_ASSERT_EQUAL_HEX(BUTTON_PRESS_UP, iot_button_get_event(arg));
|
|
ESP_LOGI(TAG, "BTN%d: BUTTON_PRESS_UP[%"PRIu32"]", get_btn_index((button_handle_t)arg), iot_button_get_ticks_time((button_handle_t)arg));
|
|
}
|
|
|
|
static void button_press_repeat_cb(void *arg, void *data)
|
|
{
|
|
ESP_LOGI(TAG, "BTN%d: BUTTON_PRESS_REPEAT[%d]", get_btn_index((button_handle_t)arg), iot_button_get_repeat((button_handle_t)arg));
|
|
}
|
|
|
|
static void button_single_click_cb(void *arg, void *data)
|
|
{
|
|
TEST_ASSERT_EQUAL_HEX(BUTTON_SINGLE_CLICK, iot_button_get_event(arg));
|
|
ESP_LOGI(TAG, "BTN%d: BUTTON_SINGLE_CLICK", get_btn_index((button_handle_t)arg));
|
|
}
|
|
|
|
static void button_double_click_cb(void *arg, void *data)
|
|
{
|
|
TEST_ASSERT_EQUAL_HEX(BUTTON_DOUBLE_CLICK, iot_button_get_event(arg));
|
|
ESP_LOGI(TAG, "BTN%d: BUTTON_DOUBLE_CLICK", get_btn_index((button_handle_t)arg));
|
|
}
|
|
|
|
static void button_long_press_start_cb(void *arg, void *data)
|
|
{
|
|
TEST_ASSERT_EQUAL_HEX(BUTTON_LONG_PRESS_START, iot_button_get_event(arg));
|
|
ESP_LOGI(TAG, "BTN%d: BUTTON_LONG_PRESS_START", get_btn_index((button_handle_t)arg));
|
|
}
|
|
|
|
static void button_long_press_hold_cb(void *arg, void *data)
|
|
{
|
|
TEST_ASSERT_EQUAL_HEX(BUTTON_LONG_PRESS_HOLD, iot_button_get_event(arg));
|
|
ESP_LOGI(TAG, "BTN%d: BUTTON_LONG_PRESS_HOLD[%"PRIu32"],count is [%d]", get_btn_index((button_handle_t)arg), iot_button_get_ticks_time((button_handle_t)arg), iot_button_get_long_press_hold_cnt((button_handle_t)arg));
|
|
}
|
|
|
|
static void button_press_repeat_done_cb(void *arg, void *data)
|
|
{
|
|
TEST_ASSERT_EQUAL_HEX(BUTTON_PRESS_REPEAT_DONE, iot_button_get_event(arg));
|
|
ESP_LOGI(TAG, "BTN%d: BUTTON_PRESS_REPEAT_DONE[%d]", get_btn_index((button_handle_t)arg), iot_button_get_repeat((button_handle_t)arg));
|
|
}
|
|
|
|
static esp_err_t custom_button_gpio_init(void *param)
|
|
{
|
|
button_gpio_config_t *cfg = (button_gpio_config_t *)param;
|
|
|
|
return button_gpio_init(cfg);
|
|
}
|
|
|
|
static uint8_t custom_button_gpio_get_key_value(void *param)
|
|
{
|
|
button_gpio_config_t *cfg = (button_gpio_config_t *)param;
|
|
|
|
return button_gpio_get_key_level((void *)cfg->gpio_num);
|
|
}
|
|
|
|
static esp_err_t custom_button_gpio_deinit(void *param)
|
|
{
|
|
button_gpio_config_t *cfg = (button_gpio_config_t *)param;
|
|
|
|
return button_gpio_deinit(cfg->gpio_num);
|
|
}
|
|
|
|
TEST_CASE("custom button test", "[button][iot]")
|
|
{
|
|
button_gpio_config_t *gpio_cfg = calloc(1, sizeof(button_gpio_config_t));
|
|
gpio_cfg->active_level = 0;
|
|
gpio_cfg->gpio_num = 0;
|
|
|
|
button_config_t cfg = {
|
|
.type = BUTTON_TYPE_CUSTOM,
|
|
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
|
|
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
|
|
.custom_button_config = {
|
|
.button_custom_init = custom_button_gpio_init,
|
|
.button_custom_deinit = custom_button_gpio_deinit,
|
|
.button_custom_get_key_value = custom_button_gpio_get_key_value,
|
|
.active_level = 0,
|
|
.priv = gpio_cfg,
|
|
},
|
|
};
|
|
|
|
g_btns[0] = iot_button_create(&cfg);
|
|
TEST_ASSERT_NOT_NULL(g_btns[0]);
|
|
iot_button_register_cb(g_btns[0], BUTTON_PRESS_DOWN, button_press_down_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_PRESS_UP, button_press_up_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_PRESS_REPEAT, button_press_repeat_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_SINGLE_CLICK, button_single_click_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_DOUBLE_CLICK, button_double_click_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_LONG_PRESS_START, button_long_press_start_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_LONG_PRESS_HOLD, button_long_press_hold_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_PRESS_REPEAT_DONE, button_press_repeat_done_cb, NULL);
|
|
|
|
while (1) {
|
|
vTaskDelay(pdMS_TO_TICKS(1000));
|
|
}
|
|
|
|
iot_button_delete(g_btns[0]);
|
|
}
|
|
|
|
TEST_CASE("gpio button test", "[button][iot]")
|
|
{
|
|
button_config_t cfg = {
|
|
.type = BUTTON_TYPE_GPIO,
|
|
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
|
|
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
|
|
.gpio_button_config = {
|
|
.gpio_num = 0,
|
|
.active_level = 0,
|
|
},
|
|
};
|
|
g_btns[0] = iot_button_create(&cfg);
|
|
TEST_ASSERT_NOT_NULL(g_btns[0]);
|
|
iot_button_register_cb(g_btns[0], BUTTON_PRESS_DOWN, button_press_down_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_PRESS_UP, button_press_up_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_PRESS_REPEAT, button_press_repeat_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_SINGLE_CLICK, button_single_click_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_DOUBLE_CLICK, button_double_click_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_LONG_PRESS_START, button_long_press_start_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_LONG_PRESS_HOLD, button_long_press_hold_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_PRESS_REPEAT_DONE, button_press_repeat_done_cb, NULL);
|
|
|
|
uint8_t level = 0;
|
|
level = iot_button_get_key_level(g_btns[0]);
|
|
ESP_LOGI(TAG, "button level is %d", level);
|
|
|
|
while (1) {
|
|
vTaskDelay(pdMS_TO_TICKS(1000));
|
|
}
|
|
|
|
iot_button_delete(g_btns[0]);
|
|
}
|
|
|
|
TEST_CASE("gpio button get event test", "[button][iot]")
|
|
{
|
|
button_config_t cfg = {
|
|
.type = BUTTON_TYPE_GPIO,
|
|
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
|
|
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
|
|
.gpio_button_config = {
|
|
.gpio_num = 0,
|
|
.active_level = 0,
|
|
},
|
|
};
|
|
g_btns[0] = iot_button_create(&cfg);
|
|
TEST_ASSERT_NOT_NULL(g_btns[0]);
|
|
|
|
uint8_t level = 0;
|
|
level = iot_button_get_key_level(g_btns[0]);
|
|
ESP_LOGI(TAG, "button level is %d", level);
|
|
|
|
while (1) {
|
|
button_event_t event = iot_button_get_event(g_btns[0]);
|
|
if (event != BUTTON_NONE_PRESS) {
|
|
ESP_LOGI(TAG, "event is %s", iot_button_get_event_str(event));
|
|
}
|
|
vTaskDelay(pdMS_TO_TICKS(1));
|
|
}
|
|
|
|
iot_button_delete(g_btns[0]);
|
|
}
|
|
|
|
TEST_CASE("gpio button test power save", "[button][iot][power save]")
|
|
{
|
|
button_config_t cfg = {
|
|
.type = BUTTON_TYPE_GPIO,
|
|
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
|
|
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
|
|
.gpio_button_config = {
|
|
.gpio_num = 0,
|
|
.active_level = 0,
|
|
},
|
|
};
|
|
g_btns[0] = iot_button_create(&cfg);
|
|
TEST_ASSERT_NOT_NULL(g_btns[0]);
|
|
iot_button_register_cb(g_btns[0], BUTTON_PRESS_DOWN, button_press_down_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_PRESS_UP, button_press_up_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_PRESS_REPEAT, button_press_repeat_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_SINGLE_CLICK, button_single_click_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_DOUBLE_CLICK, button_double_click_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_LONG_PRESS_START, button_long_press_start_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_LONG_PRESS_HOLD, button_long_press_hold_cb, NULL);
|
|
iot_button_register_cb(g_btns[0], BUTTON_PRESS_REPEAT_DONE, button_press_repeat_done_cb, NULL);
|
|
|
|
TEST_ASSERT_EQUAL(ESP_OK, iot_button_stop());
|
|
vTaskDelay(pdMS_TO_TICKS(1000));
|
|
TEST_ASSERT_EQUAL(ESP_OK, iot_button_resume());
|
|
|
|
while (1) {
|
|
vTaskDelay(pdMS_TO_TICKS(1000));
|
|
}
|
|
|
|
iot_button_delete(g_btns[0]);
|
|
}
|
|
|
|
TEST_CASE("matrix keyboard button test", "[button][matrix key]")
|
|
{
|
|
int32_t row_gpio[4] = {4, 5, 6, 7};
|
|
int32_t col_gpio[4] = {3, 8, 16, 15};
|
|
button_config_t cfg = {
|
|
.type = BUTTON_TYPE_MATRIX,
|
|
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
|
|
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
|
|
.matrix_button_config = {
|
|
.row_gpio_num = 0,
|
|
.col_gpio_num = 0,
|
|
}
|
|
};
|
|
|
|
for (int i = 0; i < 4; i++) {
|
|
cfg.matrix_button_config.row_gpio_num = row_gpio[i];
|
|
for (int j = 0; j < 4; j++) {
|
|
cfg.matrix_button_config.col_gpio_num = col_gpio[j];
|
|
g_btns[i * 4 + j] = iot_button_create(&cfg);
|
|
TEST_ASSERT_NOT_NULL(g_btns[i * 4 + j]);
|
|
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_PRESS_DOWN, button_press_down_cb, NULL);
|
|
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_PRESS_UP, button_press_up_cb, NULL);
|
|
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_PRESS_REPEAT, button_press_repeat_cb, NULL);
|
|
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_SINGLE_CLICK, button_single_click_cb, NULL);
|
|
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_DOUBLE_CLICK, button_double_click_cb, NULL);
|
|
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_LONG_PRESS_START, button_long_press_start_cb, NULL);
|
|
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_LONG_PRESS_HOLD, button_long_press_hold_cb, NULL);
|
|
iot_button_register_cb(g_btns[i * 4 + j], BUTTON_PRESS_REPEAT_DONE, button_press_repeat_done_cb, NULL);
|
|
}
|
|
}
|
|
|
|
while (1) {
|
|
vTaskDelay(pdMS_TO_TICKS(1000));
|
|
}
|
|
|
|
for (int i = 0; i < 4; i++) {
|
|
for (int j = 0; j < 4; j++) {
|
|
iot_button_delete(g_btns[i * 4 + j]);
|
|
}
|
|
}
|
|
}
|
|
|
|
#if CONFIG_SOC_ADC_SUPPORTED
|
|
#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 0, 0)
|
|
TEST_CASE("adc button test", "[button][iot]")
|
|
{
|
|
/** ESP32-S3-Korvo board */
|
|
const uint16_t vol[6] = {380, 820, 1180, 1570, 1980, 2410};
|
|
button_config_t cfg = {0};
|
|
cfg.type = BUTTON_TYPE_ADC;
|
|
cfg.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS;
|
|
cfg.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS;
|
|
for (size_t i = 0; i < 6; i++) {
|
|
cfg.adc_button_config.adc_channel = 7,
|
|
cfg.adc_button_config.button_index = i;
|
|
if (i == 0) {
|
|
cfg.adc_button_config.min = (0 + vol[i]) / 2;
|
|
} else {
|
|
cfg.adc_button_config.min = (vol[i - 1] + vol[i]) / 2;
|
|
}
|
|
|
|
if (i == 5) {
|
|
cfg.adc_button_config.max = (vol[i] + 3000) / 2;
|
|
} else {
|
|
cfg.adc_button_config.max = (vol[i] + vol[i + 1]) / 2;
|
|
}
|
|
|
|
g_btns[i] = iot_button_create(&cfg);
|
|
TEST_ASSERT_NOT_NULL(g_btns[i]);
|
|
iot_button_register_cb(g_btns[i], BUTTON_PRESS_DOWN, button_press_down_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_PRESS_UP, button_press_up_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_PRESS_REPEAT, button_press_repeat_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_SINGLE_CLICK, button_single_click_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_DOUBLE_CLICK, button_double_click_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_LONG_PRESS_START, button_long_press_start_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_LONG_PRESS_HOLD, button_long_press_hold_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_PRESS_REPEAT_DONE, button_press_repeat_done_cb, NULL);
|
|
}
|
|
|
|
while (1) {
|
|
vTaskDelay(pdMS_TO_TICKS(1000));
|
|
}
|
|
for (size_t i = 0; i < 6; i++) {
|
|
iot_button_delete(g_btns[i]);
|
|
}
|
|
}
|
|
#else
|
|
|
|
#include "esp_adc/adc_cali.h"
|
|
|
|
static esp_err_t adc_calibration_init(adc_unit_t unit, adc_atten_t atten, adc_cali_handle_t *out_handle)
|
|
{
|
|
|
|
#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
|
|
#define ADC_BUTTON_WIDTH SOC_ADC_RTC_MAX_BITWIDTH
|
|
#else
|
|
#define ADC_BUTTON_WIDTH ADC_WIDTH_MAX - 1
|
|
#endif
|
|
|
|
adc_cali_handle_t handle = NULL;
|
|
esp_err_t ret = ESP_FAIL;
|
|
bool calibrated = false;
|
|
|
|
#if ADC_CALI_SCHEME_CURVE_FITTING_SUPPORTED
|
|
if (!calibrated) {
|
|
ESP_LOGI(TAG, "calibration scheme version is %s", "Curve Fitting");
|
|
adc_cali_curve_fitting_config_t cali_config = {
|
|
.unit_id = unit,
|
|
.atten = atten,
|
|
.bitwidth = ADC_BUTTON_WIDTH,
|
|
};
|
|
ret = adc_cali_create_scheme_curve_fitting(&cali_config, &handle);
|
|
if (ret == ESP_OK) {
|
|
calibrated = true;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if ADC_CALI_SCHEME_LINE_FITTING_SUPPORTED
|
|
if (!calibrated) {
|
|
ESP_LOGI(TAG, "calibration scheme version is %s", "Line Fitting");
|
|
adc_cali_line_fitting_config_t cali_config = {
|
|
.unit_id = unit,
|
|
.atten = atten,
|
|
.bitwidth = ADC_BUTTON_WIDTH,
|
|
};
|
|
ret = adc_cali_create_scheme_line_fitting(&cali_config, &handle);
|
|
if (ret == ESP_OK) {
|
|
calibrated = true;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
*out_handle = handle;
|
|
if (ret == ESP_OK) {
|
|
ESP_LOGI(TAG, "Calibration Success");
|
|
} else if (ret == ESP_ERR_NOT_SUPPORTED || !calibrated) {
|
|
ESP_LOGW(TAG, "eFuse not burnt, skip software calibration");
|
|
} else {
|
|
ESP_LOGE(TAG, "Invalid arg or no memory");
|
|
}
|
|
|
|
return calibrated ? ESP_OK : ESP_FAIL;
|
|
}
|
|
|
|
TEST_CASE("adc button idf5 drive test", "[button][iot]")
|
|
{
|
|
adc_oneshot_unit_handle_t adc1_handle;
|
|
adc_cali_handle_t adc1_cali_handle;
|
|
adc_oneshot_unit_init_cfg_t init_config = {
|
|
.unit_id = ADC_UNIT_1,
|
|
};
|
|
esp_err_t ret = adc_oneshot_new_unit(&init_config, &adc1_handle);
|
|
TEST_ASSERT_TRUE(ret == ESP_OK);
|
|
/*!< use atten 11db or 12db */
|
|
adc_calibration_init(ADC_UNIT_1, 3, &adc1_cali_handle);
|
|
|
|
/** ESP32-S3-Korvo board */
|
|
const uint16_t vol[6] = {380, 820, 1180, 1570, 1980, 2410};
|
|
button_config_t cfg = {0};
|
|
cfg.type = BUTTON_TYPE_ADC;
|
|
cfg.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS;
|
|
cfg.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS;
|
|
for (size_t i = 0; i < 6; i++) {
|
|
cfg.adc_button_config.adc_handle = &adc1_handle;
|
|
cfg.adc_button_config.adc_channel = 7,
|
|
cfg.adc_button_config.button_index = i;
|
|
if (i == 0) {
|
|
cfg.adc_button_config.min = (0 + vol[i]) / 2;
|
|
} else {
|
|
cfg.adc_button_config.min = (vol[i - 1] + vol[i]) / 2;
|
|
}
|
|
|
|
if (i == 5) {
|
|
cfg.adc_button_config.max = (vol[i] + 3000) / 2;
|
|
} else {
|
|
cfg.adc_button_config.max = (vol[i] + vol[i + 1]) / 2;
|
|
}
|
|
|
|
g_btns[i] = iot_button_create(&cfg);
|
|
TEST_ASSERT_NOT_NULL(g_btns[i]);
|
|
iot_button_register_cb(g_btns[i], BUTTON_PRESS_DOWN, button_press_down_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_PRESS_UP, button_press_up_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_PRESS_REPEAT, button_press_repeat_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_SINGLE_CLICK, button_single_click_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_DOUBLE_CLICK, button_double_click_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_LONG_PRESS_START, button_long_press_start_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_LONG_PRESS_HOLD, button_long_press_hold_cb, NULL);
|
|
iot_button_register_cb(g_btns[i], BUTTON_PRESS_REPEAT_DONE, button_press_repeat_done_cb, NULL);
|
|
}
|
|
|
|
while (1) {
|
|
vTaskDelay(pdMS_TO_TICKS(1000));
|
|
}
|
|
for (size_t i = 0; i < 6; i++) {
|
|
iot_button_delete(g_btns[i]);
|
|
}
|
|
}
|
|
#endif
|
|
#endif // CONFIG_SOC_ADC_SUPPORTED
|
|
|
|
#define GPIO_OUTPUT_IO_45 45
|
|
static EventGroupHandle_t g_check = NULL;
|
|
static SemaphoreHandle_t g_auto_check_pass = NULL;
|
|
|
|
static button_event_t state = BUTTON_PRESS_DOWN;
|
|
|
|
static void button_auto_press_test_task(void *arg)
|
|
{
|
|
// test BUTTON_PRESS_DOWN
|
|
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
|
|
// // test BUTTON_PRESS_UP
|
|
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
|
|
vTaskDelay(pdMS_TO_TICKS(200));
|
|
|
|
// test BUTTON_PRESS_REPEAT
|
|
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
|
|
// test BUTTON_PRESS_REPEAT_DONE
|
|
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
|
|
vTaskDelay(pdMS_TO_TICKS(200));
|
|
|
|
// test BUTTON_SINGLE_CLICK
|
|
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
|
|
vTaskDelay(pdMS_TO_TICKS(200));
|
|
|
|
// test BUTTON_DOUBLE_CLICK
|
|
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
|
|
vTaskDelay(pdMS_TO_TICKS(200));
|
|
|
|
// test BUTTON_MULTIPLE_CLICK
|
|
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
|
|
for (int i = 0; i < 4; i++) {
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
}
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
|
|
// test BUTTON_LONG_PRESS_START
|
|
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(1600));
|
|
|
|
// test BUTTON_LONG_PRESS_HOLD and BUTTON_LONG_PRESS_UP
|
|
xEventGroupWaitBits(g_check, BIT(0) | BIT(1), pdTRUE, pdTRUE, portMAX_DELAY);
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
|
|
|
|
ESP_LOGI(TAG, "Auto Press Success!");
|
|
vTaskDelete(NULL);
|
|
}
|
|
static void button_auto_check_cb_1(void *arg, void *data)
|
|
{
|
|
if (iot_button_get_event(g_btns[0]) == state) {
|
|
xEventGroupSetBits(g_check, BIT(1));
|
|
}
|
|
}
|
|
static void button_auto_check_cb(void *arg, void *data)
|
|
{
|
|
if (iot_button_get_event(g_btns[0]) == state) {
|
|
ESP_LOGI(TAG, "Auto check: button event %s pass", iot_button_get_event_str(state));
|
|
xEventGroupSetBits(g_check, BIT(0));
|
|
if (++state >= BUTTON_EVENT_MAX) {
|
|
xSemaphoreGive(g_auto_check_pass);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
TEST_CASE("gpio button auto-test", "[button][iot][auto]")
|
|
{
|
|
state = BUTTON_PRESS_DOWN;
|
|
g_check = xEventGroupCreate();
|
|
g_auto_check_pass = xSemaphoreCreateBinary();
|
|
xEventGroupSetBits(g_check, BIT(0) | BIT(1));
|
|
button_config_t cfg = {
|
|
.type = BUTTON_TYPE_GPIO,
|
|
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
|
|
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
|
|
.gpio_button_config = {
|
|
.gpio_num = 0,
|
|
.active_level = 0,
|
|
},
|
|
};
|
|
g_btns[0] = iot_button_create(&cfg);
|
|
TEST_ASSERT_NOT_NULL(g_btns[0]);
|
|
|
|
/* register iot_button callback for all the button_event */
|
|
for (uint8_t i = 0; i < BUTTON_EVENT_MAX; i++) {
|
|
if (i == BUTTON_MULTIPLE_CLICK) {
|
|
button_event_config_t btn_cfg;
|
|
btn_cfg.event = i;
|
|
btn_cfg.event_data.multiple_clicks.clicks = 4;
|
|
iot_button_register_event_cb(g_btns[0], btn_cfg, button_auto_check_cb_1, NULL);
|
|
iot_button_register_event_cb(g_btns[0], btn_cfg, button_auto_check_cb, NULL);
|
|
} else {
|
|
iot_button_register_cb(g_btns[0], i, button_auto_check_cb_1, NULL);
|
|
iot_button_register_cb(g_btns[0], i, button_auto_check_cb, NULL);
|
|
}
|
|
}
|
|
|
|
TEST_ASSERT_EQUAL(ESP_OK, iot_button_set_param(g_btns[0], BUTTON_LONG_PRESS_TIME_MS, (void *)1500));
|
|
|
|
gpio_config_t io_conf = {
|
|
.intr_type = GPIO_INTR_DISABLE,
|
|
.mode = GPIO_MODE_OUTPUT,
|
|
.pin_bit_mask = (1ULL << GPIO_OUTPUT_IO_45),
|
|
.pull_down_en = 0,
|
|
.pull_up_en = 0,
|
|
};
|
|
gpio_config(&io_conf);
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
|
|
|
|
xTaskCreate(button_auto_press_test_task, "button_auto_press_test_task", 1024 * 4, NULL, 10, NULL);
|
|
|
|
TEST_ASSERT_EQUAL(pdTRUE, xSemaphoreTake(g_auto_check_pass, pdMS_TO_TICKS(6000)));
|
|
|
|
for (uint8_t i = 0; i < BUTTON_EVENT_MAX; i++) {
|
|
button_event_config_t btn_cfg;
|
|
btn_cfg.event = i;
|
|
if (i == BUTTON_MULTIPLE_CLICK) {
|
|
btn_cfg.event_data.multiple_clicks.clicks = 4;
|
|
} else if (i == BUTTON_LONG_PRESS_UP || i == BUTTON_LONG_PRESS_START) {
|
|
btn_cfg.event_data.long_press.press_time = 1500;
|
|
}
|
|
iot_button_unregister_event(g_btns[0], btn_cfg, button_auto_check_cb);
|
|
iot_button_unregister_event(g_btns[0], btn_cfg, button_auto_check_cb_1);
|
|
}
|
|
|
|
TEST_ASSERT_EQUAL(ESP_OK, iot_button_delete(g_btns[0]));
|
|
vEventGroupDelete(g_check);
|
|
vSemaphoreDelete(g_auto_check_pass);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
}
|
|
|
|
#define TOLERANCE (CONFIG_BUTTON_PERIOD_TIME_MS * 4)
|
|
|
|
uint16_t long_press_time[5] = {2000, 2500, 3000, 3500, 4000};
|
|
static SemaphoreHandle_t long_press_check = NULL;
|
|
static SemaphoreHandle_t long_press_auto_check_pass = NULL;
|
|
unsigned int status = 0;
|
|
|
|
static void button_auto_long_press_test_task(void *arg)
|
|
{
|
|
// Test for BUTTON_LONG_PRESS_START
|
|
for (int i = 0; i < 5; i++) {
|
|
xSemaphoreTake(long_press_check, portMAX_DELAY);
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
|
|
status = (BUTTON_LONG_PRESS_START << 16) | long_press_time[i];
|
|
if (i > 0) {
|
|
vTaskDelay(pdMS_TO_TICKS(long_press_time[i] - long_press_time[i - 1]));
|
|
} else {
|
|
vTaskDelay(pdMS_TO_TICKS(long_press_time[i]));
|
|
}
|
|
}
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
|
|
xSemaphoreGive(long_press_auto_check_pass);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
// Test for BUTTON_LONG_PRESS_UP
|
|
for (int i = 0; i < 5; i++) {
|
|
xSemaphoreTake(long_press_check, portMAX_DELAY);
|
|
status = (BUTTON_LONG_PRESS_UP << 16) | long_press_time[i];
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(long_press_time[i] + 10));
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
|
|
}
|
|
|
|
ESP_LOGI(TAG, "Auto Long Press Success!");
|
|
vTaskDelete(NULL);
|
|
}
|
|
|
|
static void button_long_press_auto_check_cb(void *arg, void *data)
|
|
{
|
|
uint32_t value = (uint32_t)data;
|
|
uint16_t event = (0xffff0000 & value) >> 16;
|
|
uint16_t time = 0xffff & value;
|
|
uint32_t ticks_time = iot_button_get_ticks_time(g_btns[0]);
|
|
int32_t diff = ticks_time - time;
|
|
if (status == value && abs(diff) <= TOLERANCE) {
|
|
ESP_LOGI(TAG, "Auto check: button event: %s and time: %d pass", iot_button_get_event_str(state), time);
|
|
|
|
if (event == BUTTON_LONG_PRESS_UP && time == long_press_time[4]) {
|
|
xSemaphoreGive(long_press_auto_check_pass);
|
|
}
|
|
|
|
xSemaphoreGive(long_press_check);
|
|
}
|
|
}
|
|
|
|
TEST_CASE("gpio button long_press auto-test", "[button][long_press][auto]")
|
|
{
|
|
ESP_LOGI(TAG, "Starting the test");
|
|
long_press_check = xSemaphoreCreateBinary();
|
|
long_press_auto_check_pass = xSemaphoreCreateBinary();
|
|
xSemaphoreGive(long_press_check);
|
|
button_config_t cfg = {
|
|
.type = BUTTON_TYPE_GPIO,
|
|
.long_press_time = CONFIG_BUTTON_LONG_PRESS_TIME_MS,
|
|
.short_press_time = CONFIG_BUTTON_SHORT_PRESS_TIME_MS,
|
|
.gpio_button_config = {
|
|
.gpio_num = 0,
|
|
.active_level = 0,
|
|
},
|
|
};
|
|
g_btns[0] = iot_button_create(&cfg);
|
|
TEST_ASSERT_NOT_NULL(g_btns[0]);
|
|
|
|
button_event_config_t btn_cfg;
|
|
btn_cfg.event = BUTTON_LONG_PRESS_START;
|
|
for (int i = 0; i < 5; i++) {
|
|
btn_cfg.event_data.long_press.press_time = long_press_time[i];
|
|
uint32_t data = (btn_cfg.event << 16) | long_press_time[i];
|
|
iot_button_register_event_cb(g_btns[0], btn_cfg, button_long_press_auto_check_cb, (void*)data);
|
|
}
|
|
|
|
gpio_config_t io_conf = {
|
|
.intr_type = GPIO_INTR_DISABLE,
|
|
.mode = GPIO_MODE_OUTPUT,
|
|
.pin_bit_mask = (1ULL << GPIO_OUTPUT_IO_45),
|
|
.pull_down_en = 0,
|
|
.pull_up_en = 0,
|
|
};
|
|
gpio_config(&io_conf);
|
|
gpio_set_level(GPIO_OUTPUT_IO_45, 1);
|
|
xTaskCreate(button_auto_long_press_test_task, "button_auto_long_press_test_task", 1024 * 4, NULL, 10, NULL);
|
|
|
|
xSemaphoreTake(long_press_auto_check_pass, portMAX_DELAY);
|
|
iot_button_unregister_cb(g_btns[0], BUTTON_LONG_PRESS_START);
|
|
btn_cfg.event = BUTTON_LONG_PRESS_UP;
|
|
for (int i = 0; i < 5; i++) {
|
|
btn_cfg.event_data.long_press.press_time = long_press_time[i];
|
|
uint32_t data = (btn_cfg.event << 16) | long_press_time[i];
|
|
iot_button_register_event_cb(g_btns[0], btn_cfg, button_long_press_auto_check_cb, (void*)data);
|
|
}
|
|
TEST_ASSERT_EQUAL(pdTRUE, xSemaphoreTake(long_press_auto_check_pass, pdMS_TO_TICKS(17000)));
|
|
TEST_ASSERT_EQUAL(ESP_OK, iot_button_delete(g_btns[0]));
|
|
vSemaphoreDelete(long_press_check);
|
|
vSemaphoreDelete(long_press_auto_check_pass);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
}
|
|
|
|
static void check_leak(size_t before_free, size_t after_free, const char *type)
|
|
{
|
|
ssize_t delta = after_free - before_free;
|
|
printf("MALLOC_CAP_%s: Before %u bytes free, After %u bytes free (delta %d)\n", type, before_free, after_free, delta);
|
|
TEST_ASSERT_MESSAGE(delta >= TEST_MEMORY_LEAK_THRESHOLD, "memory leak");
|
|
}
|
|
|
|
void setUp(void)
|
|
{
|
|
before_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
|
|
before_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
|
|
}
|
|
|
|
void tearDown(void)
|
|
{
|
|
size_t after_free_8bit = heap_caps_get_free_size(MALLOC_CAP_8BIT);
|
|
size_t after_free_32bit = heap_caps_get_free_size(MALLOC_CAP_32BIT);
|
|
check_leak(before_free_8bit, after_free_8bit, "8BIT");
|
|
check_leak(before_free_32bit, after_free_32bit, "32BIT");
|
|
}
|
|
|
|
void app_main(void)
|
|
{
|
|
/*
|
|
* ____ _ _ _______ _
|
|
*| _ \ | | | | |__ __| | |
|
|
*| |_) | _ _ | |_ | |_ ___ _ __ | | ___ ___ | |_
|
|
*| _ < | | | || __|| __|/ _ \ | '_ \ | | / _ \/ __|| __|
|
|
*| |_) || |_| || |_ | |_| (_) || | | | | || __/\__ \| |_
|
|
*|____/ \__,_| \__| \__|\___/ |_| |_| |_| \___||___/ \__|
|
|
*/
|
|
printf(" ____ _ _ _______ _ \n");
|
|
printf(" | _ \\ | | | | |__ __| | | \n");
|
|
printf(" | |_) | _ _ | |_ | |_ ___ _ __ | | ___ ___ | |_ \n");
|
|
printf(" | _ < | | | || __|| __|/ _ \\ | '_ \\ | | / _ \\/ __|| __|\n");
|
|
printf(" | |_) || |_| || |_ | |_| (_) || | | | | || __/\\__ \\| |_ \n");
|
|
printf(" |____/ \\__,_| \\__| \\__|\\___/ |_| |_| |_| \\___||___/ \\__|\n");
|
|
unity_run_menu();
|
|
}
|